[Release] Dangerous HUD
Moderators: winston, another_commander
Re: [Release] Dangerous HUD
well...it doesn't work (as before) on my spare machine (1680x1050) but it works fine on my main machine(1920x1080)
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
@tsgiannis what do you mean by doesn't work? It doesn't load? It is not recognized? Is it buggy? Is the display resolution bad? If you can, please post a screenshot and your log when you run into troubles, else we really have a hard time figuring out what is wrong.
Re: [Release] Dangerous HUD
I think is related to the resolution...the same thing happened when i replaced the cockpit.png with a resized 1680x1050...gsagostinho wrote: ↑Sun Feb 25, 2018 2:11 pm@tsgiannis what do you mean by doesn't work? It doesn't load? It is not recognized? Is it buggy? Is the display resolution bad? If you can, please post a screenshot and your log when you run into troubles, else we really have a hard time figuring out what is wrong.
IF i choose 1st Dangerous HUD and the assign something in the 2. Hud Selector it works fine...
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
You think what is related to the resolution? You are not telling me what is happening and so it becomes very difficult to help you. I just tested the HUD at every possible resolution Oolite allows me in full screen and it worked fine in all of them, so I really need some more info to reproduce this bug.tsgiannis wrote:I think is related to the resolution...the same thing happened when i replaced the cockpit.png with a resized 1680x1050...
IF i choose 1st Dangerous HUD and the assign something in the 2. Hud Selector it works fine...
Could you please share your log when the problem happens and also try to describe a bit better what is going on (e.g. is the OXP not loading at all, is the HUD looking strange, etc.)
Re: [Release] Dangerous HUD
Don't worry that much...on the main machine works just fine...and is not that issue...gsagostinho wrote: ↑Sun Feb 25, 2018 6:15 pmYou think what is related to the resolution? You are not telling me what is happening and so it becomes very difficult to help you. I just tested the HUD at every possible resolution Oolite allows me in full screen and it worked fine in all of them, so I really need some more info to reproduce this bug.tsgiannis wrote:I think is related to the resolution...the same thing happened when i replaced the cockpit.png with a resized 1680x1050...
IF i choose 1st Dangerous HUD and the assign something in the 2. Hud Selector it works fine...
Could you please share your log when the problem happens and also try to describe a bit better what is going on (e.g. is the OXP not loading at all, is the HUD looking strange, etc.)
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
@tsgiannis You are seeing this only from your own point of view, but as a creator I want to find and fix every bug possible so that more people can have a smooth experience with my work. So if it would not be too much trouble, I would really appreciate to get my hands on your log and perhaps on a better description of what the problem is. If you are experiencing this in one of your computers then it's quite likely that more people might run into the same problem in the future.tsgiannis wrote:Don't worry that much...on the main machine works just fine...and is not that issue...
Re: [Release] Dangerous HUD
Ok...i will get you what you need...gsagostinho wrote: ↑Sun Feb 25, 2018 7:09 pm@tsgiannis You are seeing this only from your own point of view, but as a creator I want to find and fix every bug possible so that more people can have a smooth experience with my work. So if it would not be too much trouble, I would really appreciate to get my hands on your log and perhaps on a better description of what the problem is. If you are experiencing this in one of your computers then it's quite likely that more people might run into the same problem in the future.tsgiannis wrote:Don't worry that much...on the main machine works just fine...and is not that issue...
Re: [Release] Dangerous HUD
Well i hope these help
1. Video Capture : https://vimeo.com/257543856
2. the log : https://file.io/rhpJOq
1. Video Capture : https://vimeo.com/257543856
2. the log : https://file.io/rhpJOq
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
@tsgiannis Really appreciate it, thanks a lot!
But one thing: I am not being able to open your log, that link gives me the following error:
But one thing: I am not being able to open your log, that link gives me the following error:
Code: Select all
{"success":false,"error":404,"message":"Not Found"}
Re: [Release] Dangerous HUD
Sorry for that..the hoster deletes it after 1st download (?)gsagostinho wrote: ↑Mon Feb 26, 2018 6:29 pm@tsgiannis Really appreciate it, thanks a lot!
But one thing: I am not being able to open your log, that link gives me the following error:
Code: Select all
{"success":false,"error":404,"message":"Not Found"}
try this : https://text-share.com/view/e020dfc0
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
This works fine, thanks!
Re: [Release] Dangerous HUD
If you need something more just let me know...
Re: [Release] Dangerous HUD
The new cockpit tinting looks great in the blue. Props.
Creativity is a gift, use it well.
- gsagostinho
- ---- E L I T E ----
- Posts: 573
- Joined: Sun Jul 19, 2015 1:09 pm
Re: [Release] Dangerous HUD
@BlackWolf Many thanks, I am happy you like it!
@tsgiannis I spoke with phkb and he is kindly helping me solve this issue. Here is what he says:
@tsgiannis I spoke with phkb and he is kindly helping me solve this issue. Here is what he says:
He is helping me figure out if there is anything else we could do, but in theory removing the HUD Selector should solve your problem.The log file doesn't show any errors with Dangerous HUD. The only issue is HUD Selector is timing out, which may leave Dangerous HUD in a semi-activated or non-activated state (depending on how far through its processes it got before it ran out of time). I'll have a think about what the options might be, but in the interim you could ask the user to remove HUD Selector (they only have the Dangerous HUD installed, so there shouldn't be any need to switch HUDs) and see if the error persists. The only other thing HUD Selector provides is a way to preset MFD's, and reload them on launch. If running without HUD selector works, they could try either "MFD Fast Configuration" or "MFD Restore After Load", both of which provide similar services, without HUD Selectors processing overhead.