Build your own model ship

Wiki pages · Post by **Thargoid** » Fri Aug 28, 2009 10:14 am

Just found this site and was pondering, with some of our ship designs plus their service, instant line of Oolite toy ships?

ClymAngus · Post by **ClymAngus** » Fri Aug 28, 2009 11:08 am

Thargoid wrote:
Just found this site and was pondering, with some of our ship designs plus their service, instant line of Oolite toy ships?

Well there's no harm uploading some of the designs and seeing how much they cost. As long as they meet all the criteria of course. Where are they based, I couldn't find an address.

Wiki pages · Post by **Thargoid** » Fri Aug 28, 2009 11:11 am

I'm guessing Holland, as the contact page says:

For any questions or comments you can contact one of these three Shapies, all located in the Netherlands

and the names look either Dutch or German.

Post by **Cmdr James** » Fri Aug 28, 2009 11:47 am

Those names are Dutch, (not German).

ClymAngus · Post by **ClymAngus** » Fri Aug 28, 2009 12:01 pm

Well that's not too bad. Did simonB or Griff want to plug one of their super nasties in, so we can all have a mini-stroke over the price?

wackyman465 · Post by **wackyman465** » Fri Aug 28, 2009 4:14 pm

I assume the way they do it means that price will be approximately the same for all ships, I doubt they count polygons on the ships to decide how much they'd cost. But, I'd definitely buy a model of a Simonb python if it was reasonably priced.

Cmd. Cheyd · Post by **Cmd. Cheyd** » Fri Aug 28, 2009 4:44 pm

Griff Coby 3 / F-d-L / Sidewinder for me.

Although if Simon publishes his Thargoid with twin torus rings in the body, THAT would be a cool model.

wackyman465 · Post by **wackyman465** » Fri Aug 28, 2009 9:19 pm

or you could make one out of paper, like this guy:
http://www.itchstudios.com/psg/ecp/frontier.htm
I've seen a page with all the paper models for original elite (same guy who did an animation of a Moray Star Boat landing in water, I think, but I can't find the page right now.

KZ9999 · Post by **KZ9999** » Fri Aug 28, 2009 11:58 pm

Would that be the 'Witch Space' site at mackayj.doosh.net.? Unfortunately his site seems to have died and the paper models pages were some of the pages I didn't PDF print off the site. Dang!

I've flirted with paper model craft in the past and it would be a good way of bring the classic ships to life. There are several programs that can convert 3d-modelling files into paper models for printing. The most famous is Pepakura Designer. Paper model craft is really big in Asia, especially in Japan, but all the software I've found is Japanese. Pepakura does have an English version, the only downside is that its' shareware.

If you want to do some plastic modelling, there a quite a few companies that will make stuff from 3d model files. Try goggling under resin-casting and sample casting. Where I'm at, I've been led to understand that my local polytechnic will do casting for you, if you cover the material cost for using their laser set resin fabricator, so try your local tech/college.

If you want more links on modelling try Starshipmodeler.com as they seem to be the most accessible of the specialist modeller sites.

Post by **Disembodied** » Sat Aug 29, 2009 12:23 am

KZ9999 wrote:
Would that be the 'Witch Space' site at mackayj.doosh.net.? Unfortunately his site seems to have died and the paper models pages were some of the pages I didn't PDF print off the site. Dang!

Quick! To the Wayback Machine!

wackyman465 · Post by **wackyman465** » Sat Aug 29, 2009 2:50 am

No wonder it didn't show up on the google...
(Side note: my browser says "google" is spelled wrong.. It should be "Google" according to firefox, a browser made by a "non-profit" company that makes 4 million dollars a year bending over to google.)
I'm sure somebody around these forums either has or knows someone who has a CNC milling machine...

KZ9999 · Post by **KZ9999** » Sat Aug 29, 2009 3:57 am

wackyman465 wrote:
I'm sure somebody around these forums either has or knows someone who has a CNC milling machine...

Did'ja know that you can build your own open source CNC machines. Google it and be stunned by the variety of them. (The EvilMadScientists.com Candy Fab is a fav' of mine. Think of it, sweet peppermint Coby 3's

)

I'll have a dig around my web-links dumps and see if I can find a gpl/os paper modelling program.

Website · Post by **DaddyHoggy** » Sat Aug 29, 2009 10:33 am

wackyman465 wrote:
No wonder it didn't show up on the google...
(Side note: my browser says "google" is spelled wrong.. It should be "Google" according to firefox, a browser made by a "non-profit" company that makes 4 million dollars a year bending over to google.)
I'm sure somebody around these forums either has or knows someone who has a CNC milling machine...

You need one of these - we used to have one where I worked - for demos we used to make balls within balls or ocassionally a ship in a bottle - very cool!)

wackyman465 · Post by **wackyman465** » Sat Aug 29, 2009 2:39 pm

Somebody really should upload a model - even of a standard cobby - just to see how much it would cost.

Website · Post by **DaddyHoggy** » Sat Aug 29, 2009 4:34 pm

wackyman465 wrote:
Somebody really should upload a model - even of a standard cobby - just to see how much it would cost.

Go on then...

Oolite Bulletins

Build your own model ship

Build your own model ship

Re: Build your own model ship