Jerky Graphics

For discussion of ports to POSIX based systems, especially using GNUStep.

Moderators: winston, another_commander, Getafix

User avatar
davcefai
---- E L I T E ----
---- E L I T E ----
Posts: 400
Joined: Sun Dec 03, 2006 9:07 pm

Post by davcefai »

At boot up, enter the BIOS setup. Usually this uses Del or F2 - there should be a prompt on the screen. Work through the menu. What you need is probably in the "Integrated Peripherals" section.

Whatever you have as Shared RAM for the videocard, double it and see what happens.

Notes:

1: This RAM will be unavailable for applications.
2: Do not, at this time, make any other changes. You're playing in a sensitive area and "mucking around" is not a sane option. If you inadvertently change something - or think you have - just quit without saving. There is the option to restore the defaults with, usually, F7.

Most motherboards, if rendered unbootable by insane settings, will, after a couple of unsuccessful boots, offer to reset the defaults. I'm NOT trying to scare you off, just advocating caution until you become familiar with these settings. Careful tinkering here can be very rewarding. This is where you can really optimise performance.
lolwhites
Deadly
Deadly
Posts: 183
Joined: Sat Jul 29, 2006 6:45 pm
Location: France

Post by lolwhites »

In the Advanced Chipset Setup section, I found the DVMT/Fixed Memory option set to 128MB. I changed it to "DVMT Mode", so that the graphics chip would "dynamically allocate system memory as graphics memory" (according to the blurb in the manual) but it didn't speed the game up at all :(
User avatar
davcefai
---- E L I T E ----
---- E L I T E ----
Posts: 400
Joined: Sun Dec 03, 2006 9:07 pm

Post by davcefai »

As a last attempt I'd try fixed at 256MB.
lolwhites
Deadly
Deadly
Posts: 183
Joined: Sat Jul 29, 2006 6:45 pm
Location: France

Post by lolwhites »

The BIOS won't let me do that. It's 64, 128 or DVMT Mode
User avatar
davcefai
---- E L I T E ----
---- E L I T E ----
Posts: 400
Joined: Sun Dec 03, 2006 9:07 pm

Post by davcefai »

I'm afraid I'm out of ideas.

Sorry.
User avatar
TGHC
---- E L I T E ----
---- E L I T E ----
Posts: 2157
Joined: Mon Jan 31, 2005 4:16 pm
Location: Berkshire, UK

Post by TGHC »

Go mad with the spondoolicks and buy yourself a kick ass graphics card...........that wasn't very helpful, sorry, just spent 6 hours on helplines trying to fix wifi problems..Waaaaaaaaaaaaah
The Grey Haired Commander has spoken!
OK so I'm a PC user - "you know whats scary? Out of billions of sperm I was the fastest"
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

Low frame rate on busy screen with intel 945 card.

Post by NilsR »

I have the same problem, frame rate of 4 when launching, because I have the planet in view. Hitting arrrows keys a lot, I can turn around and the frame rate goes up to over 10.
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

Post by NilsR »

Seems to be a common problem: (Try "oolite intel 945" on Google)
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

Spammers suck.

Post by NilsR »

I would have loved to add the URL here, but not only did I have to jump through hoops (register) to add this hopefully useful information, but it seems I must wait a day to post an URL. Goddamn spammers.

BTW, glxgears reports over 900 FPS.
User avatar
davcefai
---- E L I T E ----
---- E L I T E ----
Posts: 400
Joined: Sun Dec 03, 2006 9:07 pm

Post by davcefai »

BTW, glxgears reports over 900 FPS.
Erm, that's a little on the low side if not full screen.

NVidia 8400GS:
Default Window:

Code: Select all

david@davcefai:~$ glxgears
14512 frames in 5.0 seconds = 2897.042 FPS
14473 frames in 5.0 seconds = 2894.480 FPS
14749 frames in 5.0 seconds = 2949.630 FPS
14749 frames in 5.0 seconds = 2949.664 FPS
14742 frames in 5.0 seconds = 2948.217 FPS
14755 frames in 5.0 seconds = 2950.992 FPS

david@davcefai:~$
Full Screen:

Code: Select all

david@davcefai:~$ glxgears
6507 frames in 5.0 seconds = 1300.573 FPS
1307 frames in 5.0 seconds = 261.265 FPS
1305 frames in 5.0 seconds = 260.925 FPS
1299 frames in 5.0 seconds = 259.789 FPS
X connection to :0.0 broken (explicit kill or server shutdown).
david@davcefai:~$
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

Post by NilsR »

davcefai wrote:
BTW, glxgears reports over 900 FPS.
Erm, that's a little on the low side if not full screen.

NVidia 8400GS:
Default Window:

Code: Select all

david@davcefai:~$ glxgears
14512 frames in 5.0 seconds = 2897.042 FPS
14473 frames in 5.0 seconds = 2894.480 FPS
14749 frames in 5.0 seconds = 2949.630 FPS
14749 frames in 5.0 seconds = 2949.664 FPS
14742 frames in 5.0 seconds = 2948.217 FPS
14755 frames in 5.0 seconds = 2950.992 FPS
Unfortunately my numbers was not from fullscreen. But then this is only a Dell Inspiron 6400 (also called e1505) laptop with two Intel Core Duo T2080 (1.73 GHz) and this for graphics:

OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM 20061017 x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 7.0.3-rc2

It's the same numbers reported by someone (with CoreDuo T5500)
at the Berlios bug report "[ Bug #12619 ] Users accuse slow rendering with accelerated video".
User avatar
winston
Pirate
Pirate
Posts: 731
Joined: Mon Sep 27, 2004 10:21 pm
Location: Port St. Mary, Isle of Man
Contact:

Post by winston »

What happens if you type:

glxinfo

in a shell window?

It really does sound like you're software rendering the image. I have here an old Hewlett-Paqard desktop machine (i.e. Compaq inherited - the machine's probably at least 5 years old) with Intel 845G graphics, i.e. the crummiest of crummy integrated chipsets, and get 14fps full screen facing the planet.
User avatar
davcefai
---- E L I T E ----
---- E L I T E ----
Posts: 400
Joined: Sun Dec 03, 2006 9:07 pm

Post by davcefai »

with Intel 845G graphics, i.e. the crummiest of crummy integrated chipsets,
I have gathered that the 945 may actually be worse. :cry:
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

Post by NilsR »

winston wrote:
What happens if you type:

glxinfo

in a shell window?

Code: Select all

nils@dell:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read, 
    GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM 20061017 x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 7.0.3-rc2
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging, 
    GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters, 
    GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, 
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, 
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, 
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, 
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos, 
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, 
    GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_convolution, 
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, 
    GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, 
    GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, 
    GL_EXT_secondary_color, GL_EXT_separate_specular_color, 
    GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, 
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, 
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine, 
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic, 
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, 
    GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1, 
    GL_APPLE_client_storage, GL_APPLE_packed_pixels, 
    GL_ATI_blend_equation_separate, GL_IBM_rasterpos_clip, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos, 
    GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texture_rectangle, 
    GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1, 
    GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, 
    GL_SUN_multi_draw_arrays

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x27 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x29 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2f 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x31 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x57 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
User avatar
NilsR
Average
Average
Posts: 10
Joined: Tue Apr 29, 2008 11:26 pm
Location: Oslo, Norway
Contact:

From Xorg.log

Post by NilsR »

May these have anything to do with the problem?

Code: Select all

(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
How about these?

Code: Select all

II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
There's quite a lot of these...

Code: Select all

(II) intel(0): fbc disabled on plane a
3D isn 't involved, is it?

Code: Select all

(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
Finally, anyone know of some xorg.conf settings I could try?
Post Reply