MilHUD 4000 Sniper Sight OXP ver. 2.0.3 (M4000)
Date: April 9th, 2012
Author: Wildeblood
Installation and use:
Included in MilHUD 4000 version 1.1 OXP. This version is FOR USE WITH MilHUD 4000 ONLY.
Head to a planet of technical level 10 or above, where you can purchase the Sniper Sight from the ship outfitters. Sniper Sight requires the Advanced Space Compass to function, and will not be offered in the ship outfitters if you do not already have the ASC.
To use the Sniper Sight, first target a distant asteroid normally using the ident computer, then cycle through your Advanced Space Compass to "target mode". Sniper Sight will appear and facilitate more accurate targeting. Please use responsibly - Wildefire Systems does not endorse or condone hostility between spacefarers.
The Wildefire Systems Type 1D Gunsight (a.k.a. Sniper Sight) is the Ooniverse's most customizable high-precision gunsight, however there is no need to edit files to enjoy this high level of user-customization. All of Sniper Sight's configuration options are easily set using in-game menus, and can be changed on the fly.
Operating modes:
Unlike previous versions, Sniper Sight 2 has two distinct modes of operation: "hold" and "automatic release" modes refer to the gunsight's behaviour once a target is destroyed or lost for another reason.
Hold mode: when the current target is destroyed, moves out of scanner range, or the player re-activates the ident computer to seek a new target, Sniper Sight will remain active and the gunsight will immediately re-appear once a new target is acquired. To de-activate Sniper Sight when there is a current target, cycle the advanced space compass out of target mode or press F5, F6, F7 or F8 to go to a "non-flight-view" screen. If there is no current target, do not attempt to cycle the ASC, but you can still de-activate Sniper Sight by momentarily changing to another screen.
Release mode: when the current target is lost or destroyed - including if the player re-activates the target or ident systems - Sniper Sight will immediately be de-activated, and the gunsight HUD will automatically revert to the normal in-flight HUD.
Sniper Sight configuration:
You can change the configuration settings only while Sniper Sight is in use.
While the "Gunsight" HUD is shown, press N (shift-n) until "Customize Gunsight Settings" appears on screen.
Press n to show the configuration options of your Wildefire Systems Type 1D Gunsight on the prime-able equipment menu.
Then press N until "Gunsight Size" appears on screen.
Press n to switch among the six differently sized sights available, or to switch it off completely. Your new setting should take effect immediately.
Then press N until "Gunsight Mode" appears on screen.
Press n to switch the mode of operation between "hold" and "automatic release" modes.
Then press N until "Gunsight Centre" appears on screen.
Press n to switch on the centre mark. Pressing repeatedly will vary the mark through six different sizes, before switching it off again.
Then press N until "Gunsight Opacity" appears on screen.
Press n to alter the transparency among 33%, 40% or 50% opacity. Your new setting should take effect immediately.
Then press N until "Gunsight Contrast" appears on screen.
Press n to alter the brightness of the central higher-contrast patch among six different levels of low, medium or high brightness. Your new setting should take effect immediately.
Then press N until "Gunsight Reticle" appears on screen.
Press n to switch the supplementary reticle (a.k.a. Scanner Targeting Enhancement) on or off. Use of the reticle in Sniper Sight is completely independant of whether you have purchased Scanner Targeting Enhancement for general use.
Then press N until "Gunsight Camera" appears on screen.
Press n to enable the gunsight camera. While the camera is enabled, Sniper Sight will automatically keep a photographic record of all asteroids successfully destroyed. (Image files will be stored in the folder "oolite.app/oolite-saves/snapshots/" on Windows computers.)
Then press N until "Gunsight Centre Colour" appears on screen.
Press n to switch the square centre mark, and the vanes shown in hold mode, from green to yellow.
Then press N until "Gunsight Glow Colour" appears on screen.
Press n to switch the colour the gunsight will glow when on target. When on target, Sniper Sight can glow bright red, bright green or yellow.
Then press N until "Gunsight Sensitivity" appears on screen.
Press n to adjust the target sensitivity of your gunsight among five different settings. There should not normally be any need to adjust this setting.
Once you are satisfied with your choice of settings, press N until "Lock Gunsight Configuration" appears on screen.
Press n to hide the configuration menu of your Wildefire Systems Type 1D Gunsight from the prime-able equipment menu.
Compatibility note:
This version is FOR USE WITH MilHUD 4000 version 1.1 ONLY.
Change Log:
2.0.3 (April 9th, 2012) Fixed a bug, wherein the gunsight reticle could be damaged in combat and become unrepairable. Thanks to user Ad Astra for bug report.
2.0.2 (April 6th, 2012) Fixed a bug, wherein the user's settings were lost and reset to defaults, if the Sniper Sight was damaged in combat then repaired through the F3 screen. Updated HUD files to match MilHUD 4000 (version 1.1).
2.0.1 (April 6th, 2012) Added yellow option to possible glow colours when on target.
2.0 (M4000) (February 8th, 2012) Re-made HUD files to match MilHUD 4000 (version 1.0).
2.0 (January 24th, 2012) Re-started change log for all new version 2. Includes half a dozen lines of Javascript copy/pasted from Eric Walch's Tionisla Reporter OXP.