Page 1 of 2
Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 8:11 pm
by fraterchaos
Ok, so this is a little complicated, I'm hoping maybe somebody can help.
I'm running Manjaro Linux (a variant of Arch) on an AMD FX 8350 Octacore. It has an ATI Raedeon Sapphire 7770 HD graphics card.
I'm trying to run Oolite v. 1.86 and it runs ok, but it refuses to let me change the graphics setting to anything above "minimal detail"
I also tried adding some expansion packs, and they seem to work, even the ships that need shaders, except that the ringed planets one doesn't work right... instead of rings I get a flat gray square bisecting the planet.
I've checked my graphics card, drivers, and settings, they all seem fine. I'm using the ATI Catalyst drivers (proprietary) so they are the best possible drivers for that card.
The only other thing I can think could be an issue is that I run Compiz. It shouldn't effect anything, but I can't run Oolite in full screen mode (I just get a black screen) and Oolite also seems to use a ton pf processor power when running (especially when paused???) as my browser or other apps get really slow and jerky when Oolite is paused in another window.
I'm not sure what's causing all this... is there some setting in a config file or something that could be disabling higher graphics settings?
Any suggestions will be very much appreciated.
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 8:19 pm
by Astrobe
Can you post the beginning of your logs (Latest.log in the Logs directory; copy up to "Resources paths", it should be enough) which includes info about your graphics card detection, so that people who know that stuff can take a look at it?
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 8:32 pm
by Cody
Welcome aboard - what he said, and did you download Oolite 1.86 from
here.
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 10:08 pm
by fraterchaos
in response to the second question, no, I installed it via Pacman from the manjaro depository
ok, here's the logs:
Code: Select all
Opening log for Oolite version 1.86 (x86-64) under Linux 4.13.16-2-MANJARO at 2017-12-12 15:18:20 -0500.
8 processors detected.
Build options: OpenAL, new planets.
Note that the contents of the log file can be adjusted by editing logcontrol.plist.
15:18:21.424 [gnustep]: 2017-12-12 15:18:21.424 oolite[3499:3499] File NSPropertyList.m: 1013. In parsePlItem Missing semicolon in dictionary at line 17 char 622
15:18:21.427 [oxp.conflict]: OXP oolite.oxp.Rustem.DistantStar.oxz conflicts with oolite.oxp.Wildeblood.distant_suns.oxz and was removed from the loading list
15:18:21.428 [oxp.requirementMissing]: OXP oolite.oxp.Norby.Ambience_Collection.oxz had unmet requirements and was removed from the loading list
15:18:21.631 [display.mode.list.native]: X11 native resolution detected: 1440 x 900
15:18:21.813 [joystick.init]: Number of joysticks detected: 0
15:18:21.827 [rendering.opengl.version]: OpenGL renderer version: 1.4.0 ("1.4 (2.1 (4.5.13399 Compatibility Profile Context 15.201.1151))"). Vendor: "ATI Technologies Inc.". Renderer: "AMD Radeon R7 200 Series ".
15:18:21.827 [rendering.opengl.extensions]: OpenGL extensions (73):
GL_EXT_texture_lod, GL_EXT_subtexture, GL_NV_texture_rectangle, GL_IBM_texture_mirrored_repeat, GL_EXT_framebuffer_multisample, GL_EXT_texture_edge_clamp, GL_ARB_texture_mirrored_repeat, GL_ARB_framebuffer_object, GL_INGR_blend_func_separate, GL_EXT_framebuffer_blit, GL_ARB_texture_non_power_of_two, GL_EXT_abgr, GL_SUN_multi_draw_arrays, GL_ARB_texture_cube_map, GL_ARB_fragment_program_shadow, GL_EXT_framebuffer_object, GL_EXT_blend_equation_separate, GL_EXT_texture_env_dot3, GL_EXT_fog_coord, GL_ARB_texture_env_dot3, GL_SGIS_texture_lod, GL_ARB_texture_env_crossbar, GL_EXT_packed_pixels, GL_EXT_separate_specular_color, GL_ARB_texture_env_combine, GL_EXT_texture_rectangle, GL_ARB_texture_env_add, GL_ARB_shadow, GL_EXT_multi_draw_arrays, GL_SGIX_shadow_ambient, GL_EXT_texture_object, GL_ARB_texture_rectangle, GL_EXT_texture3D, GL_EXT_copy_texture, GL_EXT_point_parameters, GL_ARB_window_pos, GL_ARB_point_parameters, GL_ARB_multitexture, GL_EXT_texture_env_add, GL_SGIS_texture_edge_clamp, GL_ARB_occlusion_query, GL_SGIS_generate_mipmap, GL_ARB_depth_texture, GL_EXT_texture_mirror_clamp, GL_EXT_texture_lod_bias, GL_ARB_multisample, GL_ATI_texture_mirror_once, GL_EXT_blend_color, GL_ATIX_texture_env_combine3, GL_EXT_shadow_funcs, GL_ARB_draw_buffers, GL_ATI_texture_env_combine3, GL_EXT_vertex_array, GL_EXT_draw_range_elements, GL_ARB_point_sprite, GL_ATI_draw_buffers, GL_EXT_texture_env_combine, GL_ARB_texture_compression, GL_ARB_texture_border_clamp, GL_EXT_bgra, GL_EXT_blend_func_separate, GL_EXT_rescale_normal, GL_ARB_vertex_program, GL_EXT_blend_subtract, GL_EXT_stencil_wrap, GL_EXT_secondary_color, GL_ARB_imaging, GL_EXT_blend_minmax, GL_ARB_shadow_ambient, GL_SGIS_texture_border_clamp, GL_EXT_texture_compression_s3tc, GL_ARB_transpose_matrix, GL_ARB_fragment_program
15:18:22.000 [rendering.opengl.shader.support]: Shaders will not be used (OpenGL extension GL_ARB_shading_language_100 is not available).
15:18:22.490 [gnustep]: 2017-12-12 15:18:22.490 oolite[3499:3499] File NSPropertyList.m: 1013. In parsePlItem Missing semicolon in dictionary at line 17 char 622
15:18:22.493 [oxp.conflict]: OXP oolite.oxp.Rustem.DistantStar.oxz conflicts with oolite.oxp.Wildeblood.distant_suns.oxz and was removed from the loading list
15:18:22.494 [oxp.requirementMissing]: OXP oolite.oxp.Norby.Ambience_Collection.oxz had unmet requirements and was removed from the loading list
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 10:16 pm
by Cody
fraterchaos wrote: ↑Tue Dec 12, 2017 10:08 pmin response to the second question, no, I installed it via Pacman from the manjaro depository.
Just to check, could you please try the one from the above link - it's a complete package.
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 10:25 pm
by fraterchaos
Cody wrote: ↑Tue Dec 12, 2017 10:16 pm
fraterchaos wrote: ↑Tue Dec 12, 2017 10:08 pmin response to the second question, no, I installed it via Pacman from the manjaro depository.
Just to check, could you please try the one from the above link - it's a complete package.
I'll give that a try, if I can remember how to install things manually...
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 10:30 pm
by Cody
Thanks - from a quick glance at your log, it looks like something's up with the gfx.
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 10:37 pm
by fraterchaos
fraterchaos wrote: ↑Tue Dec 12, 2017 10:25 pm
Cody wrote: ↑Tue Dec 12, 2017 10:16 pm
fraterchaos wrote: ↑Tue Dec 12, 2017 10:08 pmin response to the second question, no, I installed it via Pacman from the manjaro depository.
Just to check, could you please try the one from the above link - it's a complete package.
I'll give that a try, if I can remember how to install things manually...
well, ok, that wasn't hard to install
And it seems to have fixed things, at least so far. The graphic settings now let me choose whatever level of detail I want, and the rings are displaying properly...
I guess the version they've got in the Manjaro repos has a bug or something.
THANKS!!!!
PS. Don't know how to mark this as solved, but the mods can if they want
Re: Issues with Graphics in Linux
Posted: Tue Dec 12, 2017 11:14 pm
by Cody
Cool!
fraterchaos wrote: ↑Tue Dec 12, 2017 10:37 pmI guess the version they've got in the Manjaro repos has a bug or something.
Probably missing a library or two - or something. It's a common problem with repos.
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 12:05 am
by fraterchaos
Cody wrote: ↑Tue Dec 12, 2017 11:14 pm
Cool!
fraterchaos wrote: ↑Tue Dec 12, 2017 10:37 pmI guess the version they've got in the Manjaro repos has a bug or something.
Probably missing a library or two - or something. It's a common problem with repos.
could be right... odd though as Manjaro usually seems to be fairly good with stuff like that.
At least I got it working.
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 2:36 am
by Commander_X
Cody wrote: ↑Tue Dec 12, 2017 11:14 pm
Probably missing a library or two - or something. It's a common problem with repos.
Cody, you can also hang a penguin at the top of your rifle, along with the Oolite logo
Nicely handled!
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 5:48 am
by Diziet Sma
fraterchaos wrote: ↑Wed Dec 13, 2017 12:05 am
could be right... odd though as Manjaro usually seems to be fairly good with stuff like that.
For some complicated reasons (including cross-platform compatibility), Oolite uses some very specific versions of certain libraries, and one or two are customised specifically for Oolite. Distros generally try to use the latest versions of said libraries for their own builds of Oolite, resulting in various incompatibilities due to API changes, etc.
The Oolite package for Linux provided at oolite.org supplies the correct libraries, packaged in such a way that they don't conflict with the rest of your OS. This also makes it easy to run Oolite on many different distros, without having to compensate/adjust for their assorted idiosyncrasies.
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 10:26 am
by Cody
Commander_X wrote: ↑Wed Dec 13, 2017 2:36 amCody, you can also hang a penguin at the top of your rifle...
I refuse to have Getafix hanging off my Winchester!
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 11:52 am
by pleiadian
I have an older AMD 7700HD or something with 2GB, running on Elementary OS (
http://www.elementary.io), no proprietary drivers. I can set everything to the max, and it does look the same as it did on Windows.
As Elementary is an Ubuntu variant (sort of), maybe there's an issue with the proprietary driver itself?
Re: Issues with Graphics in Linux
Posted: Wed Dec 13, 2017 1:04 pm
by Damocles Edge
Welcome aboard fraterchaos.
I run Manjaro XFCE myself (great distro).
Can I ask which version you are running (XFCE, KDE, GNOME) ?
I don't use compiz myself (I use the stock XFWM).
The only issue I ever really encountered with oolite was using the version installed by pamac - I found that it spread oolite files between my root partition and my home partition
(this was some time ago now - whether the pamac installed version behaves the same way I couldn't say)
I can without any doubt second the recommendation of removing the version installed by pamac and going with downloading and installing the oolite.org version.
Installation of it really is a breeze - just pick a folder of your home partition.
I have always used free drivers with my ATI card (I won't have any proprietary software on my machine) and have never had any issues.