Oolite Bulletins

Cody wrote:

Smivs wrote:

I don't normally run trunk...

You really should, you know.

You're probably right - I guess I'm too busy with other things and don't need additional complications!

BuggyBY wrote:

Haven't installed the update yet, but I noticed in v4.1.4 that while I have an unobstructed rear view in my Boa 2 using Oolite v1.77, in trunk (build 5674) the protruding exhaust parts block the lower corners of the screen. Not sure if that sort of thing will be an issue in the next stable version, but I figure pointing it out won't do any harm.

I solved that scene on my ships in the last year, or so, by making the aft_view_position about ten meters above the ship, and the distance twice that of the farthest aft projection of the ship. None of my ships show anything but what's behind them now.

mandoman wrote:

...the aft_view_position about ten meters above the ship, and the distance twice that of the farthest aft projection of the ship.

The only thing to consider here is the effect it will have on aiming the aft gun. If the gun is more or less on the 'z' axis and the view is 10m above the ship this will mean you are 'aiming high' particularly on a 'tall' ship. Moving the position backwards alone is probably a better solution.

I have not found that to be true. Whether I'm targeting from the front exterior view, or the aft_view_position, the cross hairs are more than able to settle onto the target for which I'm firing. I use to set just the distance, but from the view of the cockpit level, I always got some, if not a lot of exhaust plume in the scene. It clutters the aim. By raising the view to above the ship, nothing is in the way of aiming at a target. Those are just my observations, however, and I realize that maybe not everyone would see it so.

That's interesting.
I would expect to see some exhaust in the rear view, but not that it would obscure the view in any meaningful way. The 'normal' view position would be slightly above the gun position so you are not looking down the beam, but I'd never considered setting it quite high.
When I get a minute I'll play around with a few and see what happens