Oolite Bulletins

Posted: **Sun Jun 17, 2012 6:55 pm**

SandJ wrote:

Captain Beatnik wrote:
Is the damper adjustable and if so how can I adjust it?
You could install this OXP.

Yes I could.

But his .OXP limits the maximum values of pitch/roll/yaw.

I did not intend to limit the maximum values (and thus make the ship less maneuverable), but to icrease the damping (=the amount of time you have to press a direction key until you reach the maximum values of pitch/roll/yaw). This would ease aiming, because the movement of the crosshair would start more slowly, but not limit the maneuverability of the ship. The player still could reach the defined maximum values of pitch/roll/yaw by keeping his finger on the proper direction key.

SandJ wrote:
Captain Beatnik wrote:
Is there a key for the damper in shipdata.plist or an other config file?
Yes. Install this OXP and read the documentation within it. It tells you what to do if you want to tweak the values.

"max_flight_pitch / -_roll _yaw" affects the damping only indirect. As far as I can see, after pressing a direction key it always takes 0.5 seconds to come from zero to the defined maximum value regardless of what you have defined as maximum value. What I had in mind was to double the the amount of time you have to press a direction key until you reach the maximum values of pitch/roll/yaw for a easier aiming instead of bisecting the maximum values.

Unfortunately I have absolutely no idea how to accomplish that.

Best regards

C.B.

Posted: **Sun Jun 17, 2012 7:03 pm**

Captain Beatnik wrote:
As far as I can see, after pressing a direction key it always takes 0.5 seconds to come from zero to the defined maximum value regardless of what you have defined as maximum value. What I had in mind was to double the the amount of time you have to press a direction key until you reach the maximum values of pitch/roll/yaw for a easier aiming instead of bisecting the maximum values. Unfortunately I have absolutely no idea how to accomplish that.

Nor have I. Sounds like we need a "Precision steering" option in the 'Game Options' that does just that.

Posted: **Tue Jan 22, 2013 11:40 pm**

Unfortunately This doesn't work by me...

Code: Select all

Opening log for Oolite version 1.77 (x86-32) under Windows 5.1.2600 Dodatek Service Pack 3 32-bit at 2013-01-23 00:30:42 +0100.
4 processors detected.
Build options: spoken messages, mass/fuel pricing.

Note that the contents of the log file can be adjusted by editing logcontrol.plist.

00:30:42.453 [dataCache.rebuild.explicitFlush]: Cache explicitly flushed with shift key. Rebuilding from scratch.
00:30:42.953 [display.mode.list.native]: Windows native resolution detected: 1024 x 768
00:30:43.609 [joystick.init]: Number of joysticks detected: 2
00:30:43.640 [rendering.opengl.version]: OpenGL renderer version: 4.3.0 ("4.3.0"). Vendor: "NVIDIA Corporation". Renderer: "GeForce GT 440/PCIe/SSE2/3DNOW!".
00:30:43.640 [rendering.opengl.extensions]: OpenGL extensions (300):
GL_ARB_draw_instanced, GL_NV_texture_lod_clamp, GL_NV_float_buffer, GL_NV_vertex_attrib_integer_64bit, GL_ARB_occlusion_query, GL_EXT_texture_env_add, GL_ARB_texture_storage, GL_ARB_texture_env_dot3, GL_ARB_sync, GL_EXTX_framebuffer_mixed_formats, GL_ARB_texture_multisample, GL_ARB_explicit_uniform_location, GL_NV_texture_env_combine4, GL_ARB_point_parameters, GL_OES_depth24, GL_ARB_vertex_array_object, GL_NVX_gpu_memory_info, GL_NV_vertex_buffer_unified_memory, GL_ARB_blend_func_extended, GL_NV_explicit_multisample, GL_EXT_provoking_vertex, GL_NV_texture_shader2, GL_EXT_blend_equation_separate, GL_ARB_compressed_texture_pixel_storage, GL_NV_texture_shader3, GL_ARB_texture_non_power_of_two, GL_ARB_texture_mirrored_repeat, GL_ARB_debug_output, GL_EXT_multi_draw_arrays, GL_NV_fence, GL_ARB_timer_query, GL_ARB_texture_buffer_object, GL_ARB_texture_buffer_range, GL_OES_packed_depth_stencil, GL_NV_occlusion_query, GL_EXT_abgr, GL_ARB_vertex_program, GL_NV_shader_buffer_load, GL_ATI_texture_float, GL_ARB_draw_buffers_blend, GL_NV_shader_storage_buffer_object, GL_ARB_viewport_array, GL_KTX_buffer_region, GL_ARB_shadow, GL_NV_light_max_exponent, GL_EXT_texture_cube_map, GL_EXT_texture_compression_dxt1, GL_ARB_shader_atomic_counters, GL_NV_texture_multisample, GL_NV_primitive_restart, GL_EXT_framebuffer_object, GL_EXT_texture_sRGB, GL_ARB_shader_storage_buffer_object, GL_ARB_conservative_depth, GL_ARB_get_program_binary, GL_NV_shader_atomic_float, GL_ARB_multitexture, GL_NV_half_float, GL_NV_copy_image, GL_NV_path_rendering, GL_OES_depth32, GL_NV_register_combiners, GL_ARB_shader_image_size, GL_NV_compute_program5, GL_NV_draw_texture, GL_EXT_texture_compression_rgtc, GL_ARB_shader_objects, GL_EXT_blend_func_separate, GL_EXT_bgra, GL_ARB_pixel_buffer_object, GL_ARB_vertex_attrib_64bit, GL_NV_fragment_program2, GL_EXT_Cg_shader, GL_ARB_draw_buffers, GL_EXT_separate_shader_objects, GL_NV_texgen_reflection, GL_ARB_texture_env_crossbar, GL_ARB_fragment_shader, GL_EXT_texture_swizzle, GL_EXT_fog_coord, GL_EXT_vertex_array_bgra, GL_EXT_framebuffer_blit, GL_NV_copy_depth_to_color, GL_ARB_texture_compression_rgtc, GL_OES_read_format, GL_ARB_sample_shading, GL_NV_vertex_program1_1, GL_ARB_seamless_cube_map, GL_WIN_swap_hint, GL_EXT_texture_shared_exponent, GL_ARB_shading_language_420pack, GL_ARB_shader_subroutine, GL_OES_point_size_array, GL_EXT_texture_format_BGRA8888, GL_OES_compressed_paletted_texture, GL_EXT_geometry_shader4, GL_EXT_direct_state_access, GL_EXT_compiled_vertex_array, GL_NV_parameter_buffer_object2, GL_KHR_debug, GL_ARB_copy_image, GL_ARB_shader_image_load_store, GL_NV_vertex_array_range2, GL_ARB_shading_language_include, GL_EXT_texture_storage, GL_EXT_shader_image_load_store, GL_EXT_separate_specular_color, GL_ARB_vertex_type_2_10_10_10_rev, GL_EXT_vertex_array, GL_ARB_shading_language_100, GL_OES_texture_float, GL_EXT_framebuffer_multisample_blit_scaled, GL_EXT_rescale_normal, GL_ARB_texture_float, GL_EXT_packed_depth_stencil, GL_EXT_bindable_uniform, GL_ARB_texture_swizzle, GL_ARB_half_float_pixel, GL_EXT_texture_compression_s3tc, GL_EXT_draw_instanced, GL_ARB_occlusion_query2, GL_NV_transform_feedback, GL_NV_texture_compression_vtc, GL_ARB_texture_rgb10_a2ui, GL_SGIS_texture_lod, WGL_EXT_swap_control, GL_ARB_geometry_shader4, GL_NV_point_sprite, GL_ARB_framebuffer_object, GL_NV_conditional_render, GL_EXT_stencil_two_side, GL_ARB_texture_rg, GL_OES_get_program_binary, GL_NV_texture_expand_normal, GL_EXT_texture_type_2_10_10_10_REV, GL_ARB_color_buffer_float, GL_NV_gpu_program4_1, GL_NV_framebuffer_multisample_coverage, GL_EXT_blend_color, GL_NV_packed_depth_stencil, GL_NV_geometry_shader4, GL_NV_texture_rectangle, GL_ARB_vertex_array_bgra, GL_EXT_texture_integer, GL_EXT_texture_array, GL_ARB_base_instance, GL_EXT_import_sync_object, GL_ARB_shading_language_packing, GL_ARB_fragment_program_shadow, GL_ARB_fragment_layer_viewport, GL_NV_gpu_program4, GL_NV_fragdepth, GL_EXT_texture_buffer_object, GL_OES_standard_derivatives, GL_NV_vertex_program2_option, GL_NV_gpu_program5, GL_ARB_map_buffer_range, GL_ARB_fragment_program, GL_ARB_copy_buffer, GL_OES_point_sprite, GL_NV_blend_minmax, GL_ARB_tessellation_shader, GL_NV_gpu_shader5, GL_S3_s3tc, GL_NV_depth_clamp, GL_EXT_texture_lod_bias, GL_EXT_texture_filter_anisotropic, GL_EXT_draw_buffers2, GL_OES_texture_3D, GL_NV_fragment_program, GL_EXT_secondary_color, GL_ARB_transform_feedback2, GL_ARB_transform_feedback3, GL_ARB_ES3_compatibility, GL_EXT_framebuffer_multisample, GL_ARB_window_pos, GL_IBM_rasterpos_clip, GL_EXT_texture_env_combine, GL_ARB_vertex_shader, GL_ARB_texture_compression_bptc, GL_SGIS_generate_mipmap, GL_ARB_compatibility, GL_ATI_texture_mirror_once, GL_EXT_packed_float, GL_ARB_texture_border_clamp, GL_ARB_explicit_attrib_location, GL_NV_blend_square, GL_ARB_internalformat_query, GL_EXT_texture3D, GL_ARB_arrays_of_arrays, GL_SUN_slice_accum, GL_ARB_robust_buffer_access_behavior, GL_NV_vertex_array_range, GL_ARB_ES2_compatibility, GL_NV_vertex_program, GL_ARB_texture_query_lod, GL_NV_multisample_filter_hint, GL_ARB_invalidate_subdata, GL_EXT_texture_mirror_clamp, GL_EXT_texture_sRGB_decode, GL_ARB_texture_compression, GL_NV_vertex_program2, GL_NV_multisample_coverage, GL_ARB_texture_env_add, GL_ARB_imaging, GL_NV_vertex_program3, GL_ARB_provoking_vertex, GL_ARB_framebuffer_no_attachments, GL_EXT_gpu_shader4, GL_ARB_texture_rectangle, GL_EXT_texture_edge_clamp, GL_NV_transform_feedback2, GL_ARB_multi_draw_indirect, GL_OES_texture_half_float_linear, GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_coord_conventions, GL_OES_texture_half_float, GL_ARB_separate_shader_objects, GL_SGIX_shadow, GL_ARB_texture_cube_map, GL_NV_ES1_1_compatibility, GL_EXT_transform_feedback2, GL_NV_alpha_test, GL_ARB_vertex_attrib_binding, GL_OES_vertex_array_object, GL_EXT_framebuffer_sRGB, GL_ARB_clear_buffer_object, GL_NV_fragment_program_option, GL_EXT_texture_compression_latc, GL_ARB_robustness, GL_ARB_point_sprite, GL_ARB_texture_gather, GL_ARB_texture_buffer_object_rgb32, GL_ARB_internalformat_query2, GL_OES_depth_texture, GL_NV_depth_buffer_float, GL_ARB_depth_texture, GL_EXT_texture_object, GL_EXT_depth_bounds_test, GL_NV_fog_distance, GL_ARB_instanced_arrays, GL_EXT_blend_minmax, GL_ARB_compute_shader, GL_SGIX_depth_texture, GL_ATI_draw_buffers, GL_ARB_framebuffer_sRGB, GL_NV_fbo_color_attachments, GL_EXT_blend_subtract, GL_NV_register_combiners2, GL_EXT_packed_pixels, GL_IBM_texture_mirrored_repeat, GL_NV_texture_shader, GL_EXT_draw_range_elements, GL_ARB_texture_cube_map_array, GL_ARB_sampler_objects, GL_ARB_half_float_vertex, GL_OES_mapbuffer, GL_ARB_shader_precision, GL_ARB_gpu_shader5, GL_OES_rgb8_rgba8, GL_ARB_depth_clamp, GL_ARB_texture_storage_multisample, GL_ARB_transpose_matrix, GL_NV_parameter_buffer_object, GL_ARB_vertex_buffer_object, GL_ARB_texture_query_levels, GL_ARB_draw_indirect, GL_AMD_multi_draw_indirect, GL_EXT_pixel_buffer_object, GL_EXT_vertex_attrib_64bit, GL_ARB_transform_feedback_instanced, GL_ARB_texture_view, GL_OES_texture_npot, GL_NVX_conditional_render, GL_ARB_texture_env_combine, GL_OES_vertex_half_float, GL_ARB_shader_bit_encoding, GL_EXT_timer_query, GL_EXT_gpu_program_parameters, GL_ARB_shader_texture_lod, GL_ARB_program_interface_query, GL_ARB_uniform_buffer_object, GL_ARB_multisample, GL_EXT_texture_env_dot3, GL_OES_texture_float_linear, GL_NV_shader_atomic_counters, GL_EXT_shadow_funcs, GL_ARB_stencil_texturing, GL_EXT_texture_lod, GL_ARB_depth_buffer_float, GL_NV_pixel_data_range, GL_ARB_map_buffer_alignment, GL_ARB_gpu_shader_fp64, GL_EXT_stencil_wrap, GL_OES_fbo_render_mipmap, GL_EXT_point_parameters, GL_OES_element_index_uint, GL_NV_texture_barrier, GL_NV_gpu_program_fp64, GL_NV_complex_primitives
00:30:43.687 [rendering.opengl.shader.support]: Shaders are supported.
00:30:43.968 [dataCache.rebuild.explicitFlush]: Cache explicitly flushed with shift key. Rebuilding from scratch.
00:30:43.984 [searchPaths.dumpAll]: Unrestricted mode - resource paths:
    Resources
    ../AddOns
    ../AddOns/BGS-A1.6.oxp
    ../AddOns/Cabal_Common_Library1.7.oxp
    ../AddOns/DeepspaceHUD_Retro.oxp
    ../AddOns/DeepspaceShip.oxp
    ../AddOns/Deep_Horizon_Nav_Buoy.oxp
    ../AddOns/Famous_Planets_v2.5.oxp
    ../AddOns/Galactic_Navy 5.4.3.oxp
    ../AddOns/keyboardCobra_v1.2.oxp
    ../AddOns/Neolite_Core_Addition_1.1.1.oxp
    ../AddOns/Neolite_Core_Resources_A_1.1.oxp
    ../AddOns/Neolite_Core_Resources_B_1.1.oxp
    ../AddOns/PAGroove_Stations_v1.2.2.oxp
    ../AddOns/Smivs'Shipset-v4.1.4-HD-add.oxp
00:30:44.296 [shipData.load.begin]: Loading ship data.
00:30:44.531 [plist.parse.failed]: Failed to parse ../AddOns/keyboardCobra_v1.2.oxp/Config/shipdata-overrides.plist as a property list.
Parse failed at line 152 (char 5636) - unexpected character (wanted ';' or '}')
00:30:44.546 [shipData.merge.failed]: ***** ERROR: one or more shipdata.plist entries have like_ship references that cannot be resolved: hofd-nellie, intercept-argus, intercept-atlas, intercept-bolverk, intercept-Colossus, intercept-geryon, intercept-gog, intercept-goliath, intercept-grid, intercept-loki, intercept-magog, intercept-nimrod, intercept-surt, intercept-talos, intercept-tethys, intercept-titan, intercept-ymir, navy-argus, navy-argus-battlegroup, navy-atlas, navy-atlas-battlegroup, navy-bolverk, navy-bolverk-battlegroup, navy-Colossus, navy-Colossus-battlegroup, navy-geryon, navy-geryon-battlegroup, navy-gog, navy-gog-battlegroup, navy-goliath, navy-goliath-battlegroup, navy-grid, navy-grid-battlegroup, navy-loki, navy-loki-battlegroup, navy-magog, navy-magog-battlegroup, navy-nimrod, navy-nimrod-battlegroup, navy-surt, navy-surt-battlegroup, navy-talos, navy-talos-battlegroup, navy-tethys, navy-tethys-battlegroup, navy-titan, navy-titan-battlegroup, navy-ymir, navy-ymir-battlegroup, picket-argus, picket-atlas, picket-bolverk, picket-colossus, picket-geryon, picket-gog, picket-goliath, picket-grid, picket-loki, picket-magog, picket-nimrod, picket-surt, picket-talos, picket-tethys, picket-titan, picket-ymir
00:30:49.296 [script.load.world.listAll]: Loaded 22 world scripts:
    BGS-M 1.6
    Cabal_Common_Briefing 1.7
    Cabal_Common_Comms 1.7
    Cabal_Common_Functions 1.7
    Cabal_Common_Keyboard 1.7
    Cabal_Common_MissionHandling 1.7
    Cabal_Common_Music 1.7
    Cabal_Common_Overlay 1.7
    Cabal_Common_OXPStrength 1.7
    Cabal_Common_SpecialMarkets 1.7
    Famous Planets 2 Launch Script 2.0.2
    GalNavy 5.4.3
    hofd 5.3.0
    oolite-cloaking-device 1.77
    oolite-constrictor-hunt 1.77
    oolite-contracts-cargo 1.77
    oolite-contracts-helpers 1.77
    oolite-contracts-parcels 1.77
    oolite-contracts-passengers 1.77
    oolite-nova 1.77
    oolite-thargoid-plans 1.77
    oolite-trumbles 1.77
00:30:55.984 [startup.complete]: ========== Loading complete in 13.42 seconds. ==========
00:31:06.921 [script.load.world.listAll]: Loaded 22 world scripts:
    BGS-M 1.6
    Cabal_Common_Briefing 1.7
    Cabal_Common_Comms 1.7
    Cabal_Common_Functions 1.7
    Cabal_Common_Keyboard 1.7
    Cabal_Common_MissionHandling 1.7
    Cabal_Common_Music 1.7
    Cabal_Common_Overlay 1.7
    Cabal_Common_OXPStrength 1.7
    Cabal_Common_SpecialMarkets 1.7
    Famous Planets 2 Launch Script 2.0.2
    GalNavy 5.4.3
    hofd 5.3.0
    oolite-cloaking-device 1.77
    oolite-constrictor-hunt 1.77
    oolite-contracts-cargo 1.77
    oolite-contracts-helpers 1.77
    oolite-contracts-parcels 1.77
    oolite-contracts-passengers 1.77
    oolite-nova 1.77
    oolite-thargoid-plans 1.77
    oolite-trumbles 1.77
00:32:19.281 [exit.context]: Exiting: SDL_QUIT event received.
00:32:19.281 [gameController.exitApp]: .GNUstepDefaults synchronized.

Closing log at 2013-01-23 00:32:19 +0100.

Posted: **Wed Jan 23, 2013 7:37 am**

OSH wrote:
Unfortunately This doesn't work by me...

Since you're using 1.77, precise keyboard steering is built-in - just hold Ctrl while turning.

Posted: **Wed Jan 23, 2013 7:38 am**

This would appear to be the problem..

Code: Select all

00:30:44.531 [plist.parse.failed]: Failed to parse ../AddOns/keyboardCobra_v1.2.oxp/Config/shipdata-overrides.plist as a property list.
Parse failed at line 152 (char 5636) - unexpected character (wanted ';' or '}')

Posted: **Wed Jan 23, 2013 8:45 am**

cim: I know it, but I don't want it - I'm playing with joystick, which simulates keyboard with help Joy2Key.
Diziet Sma: Yeah, but I don't know, what exactly is wrong with this parsing and how I should change it.

Posted: **Wed Jan 23, 2013 9:04 am**

Ok.. this is very strange. The relevant section is:

Code: Select all

	//
	//	Dragon.OXP
	"dragon-an-player" =
	{
	//	name = "Dragon AN";		Original value for reference
	//	max_flight_pitch = 1;		Original value for reference
	//	max_flight_roll  = 2;		Original value for reference
	//
		name = "Dragon AN-KB"; 		// so you know it is installed
		max_flight_pitch = 0.4;		// Affects ^ V and < and > keys
		max_flight_roll  = 1.0;		// Affects <- and -> keys
	}
	//

Line 152 is "dragon-an-player" =

It looks essentially no different than Line 140, which reads "adck_cobra3-player" = yet parses with no problems.

Edit: Never mind.. I've spotted the problem.

Here's some earlier entries:

Code: Select all

	"morayMED-player" =
	{
	//	name = "Moray Medical Boat";	Original value for reference
	//	max_flight_pitch = 1.5;		Original value for reference
	//	max_flight_roll  = 2.5;		Original value for reference
	//
		name = "Moray Medical Boat (KB)"; // so you know it is installed
		max_flight_pitch = 0.4;		// Affects ^ V and < and > keys
		max_flight_roll  = 1.0;		// Affects <- and -> keys
	};   <----- Dizzy: Note Here
	"python-player" =
	{
	//	name = "Python";		Original value for reference
	//	max_flight_pitch = 0.8;		Original value for reference
	//	max_flight_roll  = 2;		Original value for reference
	//
		name = "Python (KB)";		// so you know it is installed
		max_flight_pitch = 0.4;		// Affects ^ V and < and > keys
		max_flight_roll  = 1.0;		// Affects <- and -> keys
	};   <----- Dizzy: And Here

Here's the entries for OXP ships:

Code: Select all

	// *** OXP ships ***
	//
	"adck_cobra3-player" =
	{
	//	name = "Cobra Mark III";	Original value for reference
	//	max_flight_pitch = 1;		Original value for reference
	//	max_flight_roll  = 2;		Original value for reference
	//
		name = "Cobra adck Mark III-KB"; // so you know it is installed
		max_flight_pitch = 0.4;		// Affects ^ V and < and > keys
		max_flight_roll  = 1.0;		// Affects <- and -> keys
	}   <----- Dizzy: Note Here
	//
	//	Dragon.OXP
	"dragon-an-player" =
	{
	//	name = "Dragon AN";		Original value for reference
	//	max_flight_pitch = 1;		Original value for reference
	//	max_flight_roll  = 2;		Original value for reference
	//
		name = "Dragon AN-KB"; 		// so you know it is installed
		max_flight_pitch = 0.4;		// Affects ^ V and < and > keys
		max_flight_roll  = 1.0;		// Affects <- and -> keys
	}   <----- Dizzy: And Here

Every single entry for the OXP ships is missing a closing ; after the final closing bracket }

The final 5 ships all need a ; added.

Posted: **Wed Jan 23, 2013 9:10 am**

I've copied it from original KeyboardCobra OXP. Yes, I confirm.

Posted: **Wed Jan 23, 2013 9:10 am**

Diziet Sma wrote:
Line 152 is "dragon-an-player" =

It looks essentially no different than Line 140, which reads "adck_cobra3-player" = yet parses with no problems.

That suggests that the entry above, line 149 or so, has } rather than };. So 152 is expected to close an entry, but instead opens a new one.

Posted: **Wed Jan 23, 2013 9:12 am**

See my edited post above.. there are 5 spots that need fixing.

Posted: **Wed Jan 23, 2013 9:28 am**

Great! It works now!!! Thanks!!!
And one reflection: if I would be smart enough I will fix this self...

Posted: **Sun Feb 24, 2013 9:03 pm**

cim wrote:
OSH wrote:
Unfortunately This doesn't work by me...
Since you're using 1.77, precise keyboard steering is built-in - just hold Ctrl while turning.

This is awesome! Thanks. What would be really great is an option to switch the sense of the CTRL key (I'd rather have to hold it down for a faster roll and not have to hold down ctrl for dog fights), or some way to toggle the modes so that holding down the key isn't needed at all.

Is there any way to tune the damp amount? Maybe an options slider....?

A joystick isn't really an option for me, can one really dogfight the harder opponents with just the keyboard?

Posted: **Sun Feb 24, 2013 9:51 pm**

Bogatyr wrote:
Is there any way to tune the damp amount?

There's a hidden setting for it. No in-game slider, yet, nor any way to reverse the sense.

Bogatyr wrote:
A joystick isn't really an option for me, can one really dogfight the harder opponents with just the keyboard?

Yes, definitely. It just takes practice, but then there's plenty of that to get on the way to Elite rank.

The precision key isn't that much use in a close-in dogfight, but it can be useful for picking off ships at range before or after.

Posted: **Sun Feb 24, 2013 9:56 pm**

Bogatyr wrote:
Is there any way to tune the damp amount? Maybe an options slider....?

Yes. You need to edit the file .GNUstepDefaults, found inside <OoliteInstallDir>/oolite.app/GNUstep/Defaults and add this line:

Code: Select all

"flight-arrow-key-precision-factor" = 0.33;

The 0.33 above is used as an example. The precision factor can be anything between 0.05 and 1.0 and the default value is 0.5.

Posted: **Mon Feb 25, 2013 4:03 am**

another_commander wrote:
Bogatyr wrote:
Is there any way to tune the damp amount? Maybe an options slider....?
Yes. You need to edit the file .GNUstepDefaults, found inside <OoliteInstallDir>/oolite.app/GNUstep/Defaults and add this line:
Code: Select all
"flight-arrow-key-precision-factor" = 0.33;
The 0.33 above is used as an example. The precision factor can be anything between 0.05 and 1.0 and the default value is 0.5.

Awesome, thanks!

Oolite Bulletins

[UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.1 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.1 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing

Re: [UPDATE] keyboardCobra v1.2 to aid keyboard playing